TSS type TRA and Stefa type CB
Trellborg Type TRA Radial Oil Seals are seals with a completely rubber covered outer diameter and a single sealing lip. This type is not recommended for use in heavily polluted environments. Radial Oil Seals are also known as Rotary Shaft Seals, consisting of a rubber sealing lip, metal case and a spiraled tensioning spring Their function is to keep oil and grease within the system dirt and dust out.
Size Range:
10 mm to 250 mm
Temperature:
-40 °C to 200 °C
Pressure (max):
0,05 MPa
Speed (max):
15 m/s
Material Information for the product(s) on this page
N7M
Colour:
Black
Basic Material:
NBR/metal
Commercial Description:
A 70 durometer NBR bonded to a steel case. Comes with a steel spring. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperaturs range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.
N8M
Colour:
Black
Basic Material:
NBR/metal
Commercial Description:
An 80 durometer NBR bonded to a steel case. Comes with a steel spring. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C (for a short period of time up to +120 °C). NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.
V8V
Colour:
Brown
Basic Material:
FKM/metal
Commercial Description:
An 80 durometer FKM with a standard steel case. Comes with a stainless steel spring. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C. FKM is also often used with mineral based oils and greases at high temperatures.
VCV
Colour:
Brown
Basic Material:
FKM/metal
Commercial Description:
A 75 durometer FKM with a standard steel case. Comes with a stainless steel spring. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C. FKM is also often used with mineral based oils and greases at high temperatures.
| Product No. | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | Add to Enquiry | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product No.TRA700170-N7MM5 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRA700300-V8BVP | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRA700340-N7MMP | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRA700700-N7MMP | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRA800220-N8MM5 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRA801200-N7MMP | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRA900700-N7MMP | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00080-VC2V5 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00090-4V012 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00090-N7MM5 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00100-4N011 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00100-V8BV5 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00120-4V012 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00120-N7MVR | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00140-N7MMR | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00140-VC2V5 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00140-VCBVR | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00150-4N011 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00150-N7MCR | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00150-VCBVR | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00160-N7MMP | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00160-N8MM5 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00160-VC2V5 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00170-4NV11 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRAA00170-VC2V5 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||