V-Ring type A
Profile A is the most common and available for shaft diameters from 3 to 1000 mm. The Trelleborg V-ring® is an all-rubber seal for rotary shafts, rotating with the shaft and sealing axially against the stationary counterface. Its light lip pressure generates low friction. It can also be used as a secondary seal to protect primary seals that do not perform well in hostile environments.
Size Range:
4 mm to 500 mm
Temperature:
-40 °C to 200 °C
Speed (max):
12 m/s
Material Information for the product(s) on this page
N6T50
Colour:
Black
Basic Material:
NBR
Hardness:
60 (Shore A)
Commercial Description:
The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C (for a short period of time up to +120 °C). NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.
VDT50
Colour:
Black
Basic Material:
FKM
Hardness:
65 (Shore A)
Commercial Description:
FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and aging. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.
| Product No. | For shaft diameter, d1 | Minimum, d3 | Fitted width, B1 | Material Type | Add to Enquiry | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product No.TWVA00500-N6T50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00450-N6T50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00400-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00450-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00500-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00550-N6T50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00550-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00600-N6T50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00600-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00650-N6T50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00650-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00700-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00750-N6T50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00750-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00800-N6T50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00800-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00850-N6T50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00850-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00900-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00950-N6T50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA00950-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA01000-N6T50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA01000-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA01100-N6T50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||
| Product No.TWVA01100-VDT50 | For shaft diameter, d<sub>1</sub> | Minimum, d<sub>3</sub> | Fitted width, B<sub>1</sub> | Material Type | ||||||